0
0
Your basket is empty...
Dryers table - quick guide
Dryer table - quick guide for selection of dryer -basic parameters.
| Parameter / Model | MD | PD | MDH (heated) | ME | DM (portable) |
|---|---|---|---|---|---|
| Type | Single tube | Multitubes (50, 100, 200) | Single tube | Single tube | Single tube + dessicant |
| Nafion tube O.D. | 0,053", 0,072", 0,108" | - | 0,108" | 0,053", 0,063", 0,072", 0,108" | - |
| Nafion tube I.D. | 0,042", 0,060", 0,086" | - | 0,086" | - | 0,052," 0,086" |
| Available Lengths (inch) | 12, 24, 48, 72, 96, 144 | 12, 24, 48, 72 | 96 | 6, 12, 18 24, 36, 48 | 24 |
| Housing Materials | Stainless Steel or Fluorocarbon or Polypropylene | Stainless Steel or Fluorocarbon or Polypropylene | Flourocarbon | Polypropylene | - |
| Maximum Flow Rate | 200 ml/min, 2, 4 l/min depending of type | 4, 8 nebo 15 l/min depending of type | 1 l/min | 1,2 l/min | 0,5; 1 l/min depending of type |
Parameters and recomandation for dryers MD - dryer with one tube.
| Parameter | MD-050 | MD-070 | MD-110 |
|---|---|---|---|
| Nafion tube O.D. | 0,053" | 0,072" | 0,108" |
| Nafion tube I.D. | 0,042" | 0,060" | 0,086" |
| Available Lengths (inch) | 12, 24, 48, 72 | 12, 24, 48, 72, 96, 144 | |
| Housing Materials | SS, Flourocarbone, PP | ||
| Maximum Flow Rate | 200 ml/min | 2 l/min* | 4 l/min* |
* MD-070 and MD-110 offer approximately the same drying performance. Specify MD-110 when pressure drop is a concern, MD-070 to minimize dead volume. For higher fl ow rates, please see our PD-Series dryers.
Parameters and recomandation for dryers PD - dryer with more tube.
| Parameter | PD-050T | PD-100T | PD-200T |
|---|---|---|---|
| Number of nafion tubes | 50 | 100 | 200 |
| Available Lengths (inch) | 12, 24, 48, 72 | ||
| Housing Materials | SS, Flourocarbon, PP | ||
| Recommended Flow Rates* | 4 l/min | 8 l/min | 15 l/min |
* Flow rates based upon unheated, 24" dryer achieving a -10°C dew point.